Publications

  • M. Hosseini-Pishrobat,  D. Erkan, and E. Tatar, “Analytical and experimental study of stress effects in a MEMS ring gyroscope,” Sensors and Actuators A:Physical, vol. 362, 114639, November 2023, pp. 1-15.
  • B.E. Uzunoglu, D. Erkan, and E. Tatar, “A ring gyroscope with on-chip stress compensation,” Journal of Microelectromechanical Systems, vol. 31, no. 5, October 2022, pp.741-752.  Identified by JMEMS among the 2 papers of the issue of excellent quality and highlighted in JMEMS RightNow papers to a large community of readers with a limited time open access.
  • M. Hosseini-Pishrobat, and E. Tatar, “Modeling and analysis of a MEMS gyroscope subject to imperfections,” Journal of Microelectromechanical Systems, vol. 31, no.4, August 2022, pp. 546-560.
  • E. Tatar, T. Mukherjee, and G.K. Fedder, “Stress effects and compensation of bias drift in a MEMS vibratory-rate gyroscope,” Journal of Microelectromechanical Systems, vol. 26, no.3, June 2017, pp. 569-579.  Identified by JMEMS among the 3 papers of the issue of excellent quality and highlighted in JMEMS RightNow papers to a large community of readers with a limited time open access.
  • E. Tatar, S.E. Alper, and T. Akin, “Quadrature-error compensation and corresponding effects on the performance of fully decoupled MEMS gyroscopes,” Journal of Microelectromechanical Systems, vol. 21, no.3, June 2012, pp. 656-667.
  • E. Tatar, “MEMS sensor drift compensation with on-chip stress sensing” Proceedings of IEEE TRANSDUCERS2023, Kyoto, Japan, June 25-29, 2023, pp. 292-297, invited presentation.
  • D. Erkan, A.A. Derin, and E. Tatar, “A universal gas sensing concept through acoustic coupling in a cavity,” Proceedings of IEEE TRANSDUCERS2023, Kyoto, Japan, June 25-29, 2023, pp. 682-685
  • T. Veske, D. Erkan, and E. Tatar, “Characterization of packaging stress with a capacitive stress sensor array,” Proceedings of IEEE MEMS2023, Munich, Germany, January 15-19, 2023, pp. 909-912.
  • M. Hosseini-Pishrobat, B.E. Uzunoglu, and E. Tatar, “Modeling stress effects on frequencies of a MEMS ring gyroscope,” Proceedings of IEEE MEMS2023, Munich, Germany, January 15-19, 2023, pp.869-872.
  • M. Hosseini-Pishrobat, B.E. Uzunoglu, D. Erkan, and E.Tatar, “An analytical model for vibration analysis of disk resonator gyroscopes”, Proceedings of IEEE International Symposium on Inertial Sensors and Systems-INERTIAL2022, Avignon, France, May 8-11, 2022.
  • M. Hosseini-Pishrobat, and E. Tatar, “Analysis of quadrature and frequency split in a MEMS vibrating ring gyroscope with structural imperfections,” Proceedings of IEEE TRANSDUCERS2021, virtual conference, June 20-24, 2021, pp. 1291-1295.
  • E. Tatar, T. Mukherjee, and G.K. Fedder, “On-chip stress compensation on the ZRO of a mode matched MEMS gyroscope,” Proceedings of IEEE International Symposium on Inertial Sensors and Systems-INERTIAL2016, Laguna Beach, CA, USA, Feb. 22-25, 2016, pp. 128-131.
  • E. Tatar, T. Mukherjee, and G.K. Fedder, “Nonlinearity tuning and its effects on the performance of a MEMS gyroscope,” Proc. of IEEE TRANSDUCERS2015, Anchorage, AK, USA, June 21-25, 2015, pp. 1133-1136.
  • E. Tatar, T. Mukherjee, and G.K. Fedder, “On-chip characterization of stress effects on gyroscope zero rate output and scale factor,” Proc. of IEEE MEMS2015, Estoril, Portugal, January 18-22, 2015, pp. 813-816.
  • E. Tatar, T. Mukherjee, and G.K. Fedder, “Simulation of stress effects on mode-matched MEMS gyroscope bias and scale factor,” Proceedings of IEEE PLANS2014, Monterey, CA, USA, May 5-8, 2014, pp.16-20.
  • E. Tatar, C. Guo, T. Mukherjee, and G.K. Fedder, “Effect of stress on matched-mode gyroscope frequencies,” Proceedings of IEEE International Symposium on Inertial Sensors and Systems-INERTIAL2014, Laguna Beach, CA, USA, Feb. 25-26, 2014, pp. 1-4.
  • E. Tatar, T. Mukherjee, and G.K. Fedder, “Tuning of nonlinearities and quality factor in a MEMS gyroscope,” Proceedings of MEMS2014, San Francisco, CA, USA, January 26-30, 2014, pp. 801-804.
  • E. Tatar, C. Guo, T. Mukherjee, and G.K. Fedder, “Interaction effects of temperature and stress on matched-mode gyroscope frequencies,” Proceedings of IEEE TRANSDUCERS2013, Barcelona, Spain, June 16-20, 2013, pp. 2527-2530.
  • C. Guo, E. Tatar, and G.K. Fedder, “Large displacement parametric resonance using a shaped comb drive,” Proceedings of IEEE MEMS2013, Taipei, Taiwan, January 20-24, 2013, pp. 173-176.
  • E. Tatar, M.M. Torunbalci, S.E. Alper, and T. Akin, “A method and electrical model for the anodic bonding of SOI and glass wafers,” Proceedings of IEEE MEMS2012, Paris, France, Jan 29-Feb.2, 2012, pp. 68-71.
  • M.M. Torunbalci, E. Tatar, S.E. Alper, and T. Akin, “Comparison of two alternative silicon-on-glass microfabrication processes for MEMS inertial sensors,” Proceedings of EurosensorsXXV, Athens, Greece, September 4-7, 2011, pp. 900-903.
  • E. Tatar, S.E. Alper, and T. Akin, “Effect of quadrature error on the performance of a fully-decoupled MEMS gyroscope,” Proceedings of IEEE MEMS2011, Cancun, Mexico January 23-27, 2011, pp. 569-572.